Panasonic Displays and Monitors

To download the brochures, you will need Adobe Acrobat Reader.

BT-LH1700W 17.1" Widescreen Multi-Format Color Production Monitor with Split Screen Freeze & Built-In Wave Form Monitor

Download the Spec Sheet

The BT-LH1700W 17" widescreen production-quality monitor features two auto-switching SDI / HD-SDI inputs, waveform monitoring, and freeze frame/split screen functions. Desk stand is included.

High-speed response - no blurring thanks to our overdrive circuit
Industry's lowest delay - Image Processing Circuit (I/P conversion algorithm)
Waveform monitor - a superimposed function that graphically displays luminance levels from zero to 110 IRE in any of the monitors four corners
Freeze frame / split screen - frame grab for scene comparison and critical color matching
Two dual-rate SDI HD or SD inputs - (one with Thru-Out) with auto sensing
Component Input on BNC connectors - Y, Pb, Pr and PC RGB inputs
Faithful color reproduction - closely matches chromatic ranges of CRT monitors
Diagonal line compensation - smoothes out "jaggies" for improved SD response
WXGA resolution (1280 x 768)
176 degree viewing angle up/down and left/right
One-piece design - no umbilical cord or separate AC power supply
Frame marker lines - 4:3, 16:9, 2.35:1 or background shading at 0%, 50%, or 100%
Amplified stereo speakers - two RCA pin jacks input or optional de-embedded audio on SDI
AC or DC power - 117 Volt AC or 12 Volt DC inputs (4-pin XLR)
Color temperature selection - D9300K / D6500K / D5600K / User Settable
CineGamma^TM (FILM-REC) compensation - expressly for VariCam monitoring
GPI and RS-232C ports for external control
Preset / manual picture adjustments with indicator lights
VESA mount - both 100mm and 75mm mounting is possible
Rack mount - fits in standard EIA rack with optional mounting kit
Tally lamp - red or green
Desk stand included

Request a Quote Online

BT-LH1760 17" BT Series Multi-Format Color LCD Production Monitor with 120 Hz IPS+ Panel, Built-In Waveform Monitor & Vectorscope

Download the Spec Sheet

The high-performance BT-LH1760 17" LCD production monitor combines an advanced In-Plane Switching panel with outstanding black level and high-end functionality to provide exceptional performance for critical monitoring and viewing. Because it has a 120-Hz double-speed drive, twice that of current LCD monitors, the BT-LH1760 handles fast motion content exceptionally well and reduces image blur to a level never before seen in a professional LCD display. Designed with a 3D Look Up Table (LUT) and 10-bit image processing, this AC/DC high definition monitor delivers a remarkable picture that will give you the edge in the studio or in the field.

The LH1760 is equipped with a built-in waveform monitor and Vectorscope, as well as five function buttons that assure quick access to value-added features such as pixel-to-pixel display, cross hatch, split screen, audio level meters, time code and closed caption (from video) displays. With a rugged diecast aluminum frame, low power consumption and quiet operation, the LH1760 is ideal for a wide range of HD production applications in the studio or the field.

1280 x 768 resolution
Wide 176° horizontal and vertical viewing angle
Built-in waveform monitor and vectorscope (from HD-SDI, SDI ) both display all picture lines
High contrast, improved black level
Image-enhancing functions including split-screen/freeze frame (live input vs. freeze frame), Marker and Blue-only, H/V delay display, monochrome and Cross Hatch overlay display
Cine-gamma (Film-Rec) compensation function for use with cameras including the Panasonic AJ-HDC27 VariCam HD Cinema Camera and the new AJ-HPX3700 and AJ-HPX2700 P2 HD VariCam camcorders
Embedded audio is standard
Inputs/outputs include: DVI-D input and two HD-SDI/SDI Auto switching inputs, component video (Y/Pb/Pr), RGB, PC RGB, external sync, speaker and headphone outputs
Headphone output can output embedded audio and audio level meter from HD-SDI,SDI
Energy saving -- consumes 50% less power in AC operation than prior models and includes an automatic power save mode
Desk stand included, built-in AC/DC power supply
One year warranty (parts & labor) standard. A two-year extended warranty is available upon end user registration.

Request a Quote Online

BT-LH2600W 26.0" Widescreen Multi-Format Color Production Monitor with Pixel-to-Pixel Mapping, Split Screen Freeze & Built-In Wave Form Monitor (with desk stand)

Download the Spec Sheet

Unsurpassed built quality with die cast aluminum frame
3 year "production tough" warranty
New! - True 16x9 format aspect ratio with 1366 x 768 resolution
New! - Audio level meters superimposed and see through - up to eight channels from HD-SDI
New! - Embedded audio capability now built-in as standard equipment
New! - 80% of 4x3 safety marker can now be seen in 16x9 mode
New! - "Pixel to Pixel" mode for 720 or 1080 HD signals for critical focusing
New! - 26" diagonal yields four 13" pictures when used with a quad splitter
Exclusive! - High-speed response -- no blurring during pans thanks to our overdrive circuit
Exclusive! - Industry's lowest delay image processing circuit -- new I/P conversion algorithm converts interlaced signals to progressive signals with minimal delay
Exclusive! - Waveform monitor -- a superimposed function that graphically displays luminance levels from -5 IRE to 108 IRE in any of the monitor's four corners
Exclusive! - Freeze frame - frame grab for image comparison / analysis (entire frame or center)
Exclusive! - Split screen function for critical color matching (live input vs. freeze frame)
Two SD/HD-SDI auto sensing inputs with one active thru-out
Frame marker lines (4:3, 16:9, 2.35:1) with side panel shading at 0%, 50%, or 100%
Five function buttons (user-defined) can be set to WFM, Blue Only, H/V Delay, "Pixel to Pixel", Monochrome, Aspect ratio, Gamma select, Auto-setup, Scan, and 2/4/8 audio level meters
Faithful color reproduction -- closely matches chromaticity of CRT monitors
Diagonal Line Compensation smoothes out "jaggies" for improved SD response -- new algorithm reduces picture degradation to near zero in vertical direction, detects correlation of diagonal direction, and minimizes aliasing that causes degradation in the moving picture
176 degree horizontal and vertical viewing angle
CineGamma^TM compensation - expressly for VariCam FILM-REC monitoring
One-piece design - no umbilical cord or separate AC power supply
Component input on BNC connectors - Y, Pb, Pr, PC RGB inputs and composite & Y/C
Amplified stereo speakers (two RCA pin jacks input or embedded audio on SD/HD-SDI included)
Color temperature selection (D9300K / D6500K / D5600K / user adjustable)
2.35:1 anamorphic mode for viewing 16:9 cameras with anamorphic lens adapter
GPI and RS-232C ports for external control
Menu can be positioned in five different screen locations
Menu control of built-in fan
Preset/manual video control adjustments with indicator lights for non unity settings
Three level tally lamp (red, green or amber)
Desk stand included

Request a Quote Online

BT-LH900 8.4" BT Series Multi-Format Color LCD Monitor

Download the Spec Sheet

Lightweight at 4.4 lbs, compact size of 8-9/16" (W) x 6-15/16" (H) x 2-7/16" (D)
8.4" screen size, 4:3 aspect ratio, 1024x768 (XGA) panel
Approx. 16.77 million colors
Selectable color temperatures
Multi-format: 1080/24/25P, 1080/60/50i, 720p. 576i and 480i/p auto selectable
Real-time waveform monitoring function in 16x9 mode
Detachable control panel
Independent control knobs for brightness, contrast, chroma, peaking/phase
Power requirements: DC12V (11-17V) 22.8W includes low battery warning
Built-in CineGamma^TM table for use with AJ-HDC27 VariCam^®
Equipped with marker, underscan and blue-only functions
Five user mode settings can be saved and recalled

Request a Quote Online

BT-LH80W 7.9" Widescreen Multi-Format Color Electronic Viewfinder & Production Monitor with Pixel-to-Pixel Mapping & Built-In Wave Form Monitor

BT-LH80W Download the Spec Sheet

The BT-LH80W 16:9 HD/SD LCD monitor is a versatile solution for studio and field monitoring. The compact 7.9" multi-format LCD monitor features advanced video processing technology and delivers high-resolution (800 x 450 pixel) playback and production-quality performance with advanced focus assists for critical focusing in HD. This compact, low-power unit can double as an electronic viewfinder for use with Panasonic high definition camcorders. The LH80W is ideal for use in dual rack mounts and mobile vehicles.

Focus Assistance includes a Focus-in-Red function (the outlines turn red when sharp focus is achieved) and a Pixel-to-Pixel 2.4X function (to help sharpen focus)
Advanced video processor ensures industry's lowest delay
Lightweight design allows for easy on-camera mounting, especially with optional BT-MOUNT
15-pin viewfinder terminal can connect to the 20-pin viewfinder connection on select Panasonic high definition camcorders
Can be powered from select Panasonic high definition camcorders (12V, 1.5 Amps)
800 x 480 pixel WVGA resolution panel (effective 800 x 450)
Simple Cross Hatch overlay function allows users to check camera tilt and composition
Waveform Monitoring, Blue Only and Marker
Displays 4:3 aspect ratio images
RS-232C and GPI remote control terminals
Tally (Front: Red/Green, Back Tally: Red)
Power Supply: Anton Bauer Gold Mount, 4-in XLR, or special 4-pin cable from camera
Optional RAK-80 rack mount holds two BT-LH80Ws side-by-side
One-year warranty (parts & labor)

Request a Quote Online