| Datavideo
Products
Featured Datavideo
Products
SE-500
COMPOSITE
& S-VIDEO SWITCHER - 4 INPUTS
The real time Quad Split Preview that includes red,
yellow and green
markers to indicate the program, preview and other sources as well as
the next selected effect. And, there is a button that will cause the
preview display to show the next selected effect. The operator can use
one monitor to observe all sources and the next selected video effect
before broadcast.
Included Accessories
S-Video 4ft/1.22m (1)
BNC Male to RCA Male Cable (2)
RCA Female to BNC Male Connector (2)
RCA Stereo (1)
YUV Cable (1)
Power Supply 110/220 12VDC
FEATURES
- Preview Control
- Selectable sub-source
monitoring or effect preview
- 8 different background
colors
- Wipe Patterns
A/B Roll, A/B Dissolve, Quad, Freeze, Split with borders.
Small PIP: 243(W) x 162(H)
Large PIP: 288(W) x 194(H)
- Audio Mixer
- Ergonomic T-bar
- Headphone Jack and
Control on the Front
- RS232 Protocol
- MIDI Control
SPECIFICATIONS
- Built-in Four Channel
Frame Synchronizer (TBC's) - No genlock required.
- Video Bandwidth S (Y/C)
5.0MHz Composite 4.5MHz
- Audio Bandwidth 20 to
20KHz +/- 3dB
- Signal/Noise Ratio: Video
50dB Audio 65dB
- DG Amplitude tolerance
< +/- 3%
- DP (Phase tolerance)
< 3°
- Audio THD < 0.1%
HS-500
Hand-carried studio
The SE-500 is available in a little suitcase that include the TLM-702 monitor, wired and ready to edit.
FEATURES:
- Strong locking pivot joints - easy adjustment of the viewing angle of the high-quality TLM-702 TFT LCD monitor.
- Ergonomic design - the aluminum case has been especially designed to make operation extremely comfortable, and setup/break down very quick
- Integrated solution
- HS-500 is fully integrated with cable loom and power supply.
Connection to video sources (such as camcorders) is made asy with the
quick release pivoting back panel.
- Aluminum carry case - HS-500 is supplied in a stylish light aluminum carrying case, convenient for easy and secure transport and storage.
Datavideo LCD
Monitors

TLM-70D
7" DV Input LCD Monitor
The
TLM-70D is a portable, DV input monitor with removable stereo speakers
and a small audio amp. It includes a built in DV/Analog converter that
will let you connect additional monitors or test insturments.
FEATURES:
- DV
In/Out
Two 6-pin DV connectors
- 12
VDC Input
Conect the TLM-70 to any 12V source including the one that comes with
it.
- Analog
Composite Video In/Out
- Analog
Audio In/Out
The TLM-70 has a built-in format converter from DV to Analog, so DV
audio is also available on the audio output
- Speakers/Headphones
Connect external speakers to the 1W amplifier
Connect stereo headphones through the mini jack
- Tally
Light
The red/green tally light on the front is controlled by the 15-pin
connector on the rear of the TLM-70.
- Flip/Aspect,
Source Select Switches
With these switches, you can select the source and aspect ratio
- Locking
Handle
Handle pivots and locks in position
- 1/4x20
threaded hole for tripod screw
- Tint,
Color, Contrast, Brightness
These controls are on the back of the TLM-70 (tint is an NTSC control
only).
- NTSC/PAL,
0 IRE/7.5 IRE
These switches let you watch video in Buffalo, Bremen, Beijing,
Bellingham, Barrie, Bucaramanga or most anywhere else.
- Removable
Sun Shade
This lightweight sunshade is held in place by magnets
- Removable
Speakers
- Carrying
Case
Unit
Dimensions/Weight
Width: 7.5 inches, 190.5 mm
Depth: 2.5 inches, 63.5 mm
Height: 5.5 inches, 139.7 mm
Net Weight: 3.5 lbs, 1.8 kgs
Included Accessories
Power Supply 110/220 12VDC
BNC 4ft/1.22m (1)
2266 6/6p,1.8m(1)
2264 6/4p,1.8m(1)
Power Cord,
Carrying case
Removeable sunshade
TLM-404
4" x 4 TFT LCD Monitor
The
TLM-404 includes four 4" TFT LCD monitor in a standard 19" rackmount, 2
RU high. It can tilt up to +/- 30 degrees and lock in any position.
Controls include contrast, brightness, color and tint. (Tint is NTSC
only). Composite video in with 75 ohm self terminating pass through.
Three tally LED's per screen.
Unit Dimensions -
Standard 19" rack mounting size
Width: 19 inches/482.6 mm, Depth: 3 inches/76.2 mm
Height: 3.5 inches/88.9 mm, Net Weight: 4 lbs/2 Kgs
A/C Input: 100-240V, 1.0A, 50-60HZ
D/C Output: 9-12V --- 3.0A
Included Accessories
Allen Wrench (1.5 mm)
Allen Wrench (2.5 mm)
Instruction Manual (1)
BNC Cable 4ft/1.22m (4)
Power Adapter (1)
Power Cord (1)
TLM-700
7" TFT LCD Monitor
The
TLM-700 is a portable, analog input monitor with two Composite Video
inputs.
Unit Dimensions/Weight
Width: 7.26 inches, 127 mm
Depth: 1.5 inches, 38.1 mm
Height: 5 inches, 184.4 mm
Net Weight: 1.5 lbs, 0.8kgs
Included Accessories
Power Supply 110/220 12VDC
BNC 4ft/1.22m (1)
Power Cord
Removable Sunshade
Carrying Case

TLM-702
7" x 2 TFT LCD Monitor
The TLM-702 includes two 7”
TFT LCD monitors in a standard 19” rackmount. It can tilt up
to +/- 30 degrees and lock in any position. Controls include contrast,
brightness, color, and tint. (Tint is NTSC only).
Unit
Dimensions/Weight
Width: 19 inches, 482.6 mm
Depth: 2.5 inches, 63.5 mm
Height: 5.25 inches, 133.4 mm
Net Weight: 5 lbs, 2.3 kgs
A/C Input: 100-240V, 1.0A, 50-60HZ
D/C Output: 9-12V --- 3.0A
Included Accessories
Allen Wrench (1.5 mm)
Allen Wrench (2.5 mm)
Instruction Manual (1)
BNC Cable 4ft/1.22m (2)
Power Adapter (1)
Power Cord (1)

TLM-350
TFT LCD Monitor
A small Composite Video monitor that
tilts and twists in any direction. Includes a sunshade, 12v battery,
nylon carry case and a small ball head that will mount in a camera
shoe. It operates on 12 VDC.
Unit
Dimensions/Weight
Width: 3.5 inches, 88.9 mm
Depth: .88 inches, 22 mm
Height: 3.2 inches, 81.3 mm
Net Weight: .5 lbs, .23 kgs
Included Accessories
Ball Head (BH-05)
Li-Battery (1)
Battery charger
Small battery bag
Carrying Case
Male to male DC cable
Sunshade
Case and a BH-04 Ball Head
Datavideo Intercoms
ITC-100
Intercom
An
innovative, 8 remote user and base station intercom that can use low
cost cell phone headsets or high quality, professional units.
Users are connected to the base station via belt packs and 20 meter
audio cables (5 pin XLR connectors) that may be extended up to 300 meters.
Unit
Dimensions/Weight
Width: 19 inches, 482.6 mm
Depth: 5 inches, 127 mm
Height: 1.5 inches, 38.1 mm
Net Weight: 4 lbs, 2.8 kgs
AC Input: 110/220 VAC 1.5 amp (or connect to the PD-1)
Includes Tally indication on the beltpacks, and chassis grounding screw for a common audio ground.
Included Accessories
1 – Rack Mount Intercom, 1 x Gooseneck MIC
1x DJ lamp, 1x 12V/1.5A Power Adaptor, 4 x Belt packs
4x 20m cables, 4x headsets, 4x TD-1 Tally Lights.
Request
a Quote Online
|